For sale is a complete tools set for watch collector, hobbyist need. This kit offer you the tools need to keep the Invicta Pro Diver watch for sizing kit.
You can do maintainence and save money yourself without taking the watch to jeweler or watch maker or end up leaving the expensive watch over there for some minor job.
With this kit you can change or remove band or straps from the watch.
It comes with brief instruction for strap and band.
Kit consist of:
Watch Case opener
Ergonomic Case back opener
Fine Nose Tweezer
Spring bar Remover
0.8mm and 1.0mm Pin Remover
Double Headed Hammer Nylon/Steel for punch Pins
Strap or Band Link pin Remover
Screw Driver 1.0mm, 1.2mm, 1.60mm, 1.8mm
How to Use Band Opener:
This removes the links for the smaller size bands. Lay the bracelet flat on the cradle making sure that the arrows printed on the extension links face away from the tool's push pin. Make sure the link pin and the pin from the tool are properly aligned when pushing the pin out. Please refrain from pushing out at an angle, because the pin may break. Keep in mind that you do not need a lot of force to make these pins come out. If for any reason you are turning the knob and nothing is happening, stop and realign. To reconnect the links, simply push the closed part of the pin against the arrow.
Case Opener: This tool assists in removing a case back that is pressure closed. However, it should not be used if the case back is screwed down. Simply slide the tool through the small gap and pop the case back off. Stand: Use this to hold the bracelet in place while hammering out the pin to remove or add links for larger sized bands. On the underside of the bracelet links, there will typically be an arrow pointing in direction the links should be pushed out. Position the pin pusher over the pin to be removed and tap the pin out from the top with the small hammer.
Pin Remover: This allows you to remove the band from the dial. Slip the tool between the band and the case where the spring bar is located. Then use this tool to unhook the spring bar thereby releasing the band.
It is a complete set watch repair tool kit package. It is perfect kits for professional watchmaker, watch collector and hobbyist.
It comes in very nice Leather Case.
It is great for watchmaker, watch collector and hobbyist and personel use so that you can save money by doing it yourselves.
All Customers Please Read The Following Before Purchasing:
Be sure to check our detailed measurement guide below or in the photos/images section of the listing to assist you with purchasing the correct parts for the watch. The guide will show you how to measure the lug width opening of the watch using a ruler, how to check the model number, and assist you with other questions you may have regarding measurement. Watches may share a visual resemblance, yet variations in case size or year model can distinguish them. This will help to avoid any returns or exchanges. We are also an email away to assist with any questions you may have. Thank you for the business!
100% Satisfaction Guarantee!
We sell only the best quality replacement watch parts and accessories for the watch. the satisfaction is guaranteed or the money back! We have been in the watch parts industry for over 50 years and have been selling online for over 20 years. Buy with confidence from a reputable seller in the USA that you can trust! Visit our online store for a huge selection of other watch parts.
sale!
sale!
sale!
